Innovations in Communications™ Since 1955

LEE DAN® COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
S1 Series
 *Discontinued*
Airchime®
Steam Whistles
Indoor or Outdoor Use
Edwards is a registered trademark of UTC Fire & Security
 

Steam whistles may be used for general signaling applications. The sound is generated by means of a resonant cylinder which re-sounds when a difference in pressure is caused by air or steam passing by the edge of the open cylinder. These whistles may be used in indoor or outdoor applications.

Designed for mounting on air or steam supply piping, supplying between 165 and 200 PSIG (11.6 and 14.1 kg/sq cm). Steam whistles may be installed in mines, refineries, and industrial plants. They can be used to signal shift changes, equipment troubles, or for other general signal applications.

Specifications
Indoor and outdoor use
Coated steel or bronze finish
165 to 200 PSIG (11.6 to 14.1 kg/sq cm)
Single tone
Activated by a 120V AC 60 H solenoid valve (purchased separately)
Frequency dependent upon whistle size
Click for Spec Sheet
S1-1X2 EDWARDS Airchime Steam Whistle, 1250 HZ
S1-2X4 EDWARDS Airchime Steam Whistle, 740 HZ
S1-4X8 EDWARDS Airchime Steam Whistle, 392 HZ
S1-6X12 EDWARDS Airchime Steam Whistle, 263 HZ
| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated October 23, 2014

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

© 2001- Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8