The Remote Booster Power Supply is a self-contained 24V DC power supply designed to augment fire alarm audible and visual power requirements. The booster contains all of the necessary circuits to monitor and charge batteries, control and supervise four Class B or two Class A Notification Appliance Circuits (NACs) and monitor two controlling inputs from external sources.

Provides ample space for additional Genesis ® interface modules and battery compartment.

Fault conditions detected by the EBPS will open the main panel's NAC.

EBPS notification appliance circuits easily configure for either 3-3-3 temporal or continuous rates.

In addition to the three generated signal rates, the EBPS can also be configured to follow the signal rate of the main panel's notification appliance circuit, and provide the ability to synchronize Edwards Genesis' strobes and horns.

The EBPS includes seven on-board LED indicators: one for each resident NAC; one for battery supervision; one for ground fault; and one for AC power. The trouble contact has a sixteen second delay when an AC power failure or brownout condition is detected, reducing the reporting of troubles during short duration AC brownouts.

EBPS configuration options include: AC power fail delay, sensing input to NAC output correlations. NAC 1 through 4 are configurable as auxiliary outputs. Auxiliary outputs can be on or off after 30 seconds without AC power. Jumpers configure the EBPS for Class A or Class B wiring.