Innovations in Communications™ Since 1955

LEE DAN®COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com
Loading
 5535 & 5510M
 Series
Adaptatone® Remote Amplifier
and Audio Signal Converter
Edwards is a registered trademark of UTC Fire & Security
 

The Edwards 5535 Remote Amplifier has been designed to power remote speakers in Adaptatone system operation. The amplifier output is 70V line with a maximum of 15 watts.

The 5510M Audio Signal Converter allows signaling flexibility through the integration of Adaptatone signals into installed paging systems. The 5510M-25Y6 converts a 25V RMS input into a 10 VRMS output. The 5510M-70Y6 converts a 70V RMS input into a 10V RMS output.

All units are designed for either 1/2" (13mm) conduit or surface mounting in industrial applications calling for high decibel output and microprocessor reliability combined with simultaneous signal delivery over all speakers included in the system. Typical applications include: emergency warning systems, plant evacuation alarms, security intrusion sirens, process monitoring, shift start-and-dismissal horns, and paging signals.

Features
15 Watts
Weatherproof
Corrosion resistant electrostatic heat flowed epoxy finish
Agency Approvals
UL 464 Listed
NEMA Type 3R
IP 44
Specifications
Heavy duty zinc cast construction
24V DC battery backup terminals provided
Click for Spec Sheet



Cat.
 No.
Volts Signal Off
Standby Current (Amps)
Signal On
Operating Current (Amps)
5510M-25Y6 120V AC 50/60 Hz 0.110 0.310
5510M-70Y6 125 V DC
250V DC
120 V AC 50/60 Hz
240 V AC 50/60 Hz
0.10 0.15
0.77
0.24
0.15
| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated October 6, 2011

Lee Dan Home PageLEE DAN®COMMUNICATIONS, INC.
 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail: info@leedan.com

©2001-2011 Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8