Lee Dan logo
 
 
 
 
 
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com

Black Metal Buttonstyle Vandal-Resistant Intercom Lobby Panels
Lowest Cost Vandal-Resistant Style!

VS-040ST
VS-040ST VAN-GUARD™ Vandal-Resistant Apartment Entry Panel

40 Button Surface Mount

VAN-GUARD™ Vandal-Resistant Apartment Entry Panel

Heavy Extruded Aluminum Durable Intercom Lobby Panels

 

Standard Van-Guard Features

  • Surface Mount, Housing Included
  • All Metal Construction
  • Heavy Extruded Anodized Aluminum
  • Integral Polycarbonate Protected Alphabetical Directory
  • Double Metal Speaker Baffle
  • Mylar Cone Weather-Resistant Loudspeaker
  • Custom Sizing Available
  • Self-Wiping Buttons on Metal Backplate
  • Any Multiple of 4 Buttons
  • Custom Engraved, Solid Aluminum ‘Plungers’
  • Standard Engraved: 1-40 as shown
  • Custom Engraved: Upon Request, Such as 1A-20A, 1B-20B
  • Two (2) Standard Finishes
  • Optional Outdoor Rain-Guard™ Weather Hood
  • 'Scrulox' Tamper-Proof Access Screws
Flush Mount
Model Available
Also Consider
Quantum Style Stainless Steel

Van-Guard Button Options:


See Spec Sheet

See Wiring Instructions

Size 18 3/4"H x 10" W x 2 1/8" D
Material
Finish
Heavy Extruded Anodized Aluminum
Speaker 3 1/2", 1.0 Watt, 45 Ohm Mylar Cone, Weather-Resistant
Heavy duty magnet with natural voice reproduction
Also used for tone signal from lobby panel
Grille Double Metal Speaker Baffle
Buttons
ST-008 Plastic Standard Type
ST-008/2 Replacement Type Push Buttons
Holes Mounting holes, to fit OF-202S frame (included)
Screws Includes Scrulox tamper resistant screws
Requires SC-1 Scrulox tamper screw driver to install
Directory Strips
LDDS: LEE DAN Directory Strip 3 13/16" W x 1/4" H Up to 22 Characters
LDDS-B: Blank LDDS, Used for Spacing Between Names 3 13/16" W x 1/4" H Blank LDDS
LDDS-X: Broadcast Message Strip 3 13/16" W x 1" H Up to 4 Lines
Unlacquered vs. Lacquered Brass
MILLENNIUMCustom Intercom Entry Panels Are Available In Two Finishes:
STANDARD Finish is Unlacquered.
This is a bright, shiny unprotected polished finish. Unlacquered panels will show every fingerprint, and smudge. Loss of its original luster will begin immediately, and will become more noticeable as a result of passage of time and natural day to day usage. As it reacts with oxygen and the elements, the unprotected brass finish will oxidize and develop a dark patina that some consider an antique-brass, or "bronzy" look. Depending on environmental conditions, it could take approximately two years to attain the darkest patina.
Lacquer is an OPTIONAL Finish.
This is a bright, shiny protected polished finish. Lacquered panels show fewer fingerprints and fewer smudges. Most importantly, lacquered panels may retain its original luster over years of normal use. Lacquer finishes will wear over time and are not considered permanent. Only the finished front of the panel is lacquered. Edges, mounting holes and other production holes may still be vulnerable to gradual oxidation. Lacquering is meant to protect a panels' bright, shiny luster, and should not be considered a guard against scratches or vandalism. Do not attempt to polish or clean lacquered panels, as this will damage the lacquer. As an added process, lacquering may add 1-3 weeks to standard production time.

Print Lacquer Information

Required Components

PK-543A (1 per Bldg)

Apartment Stations

SC-1 "Scrulox" Screwdriver

Replaceable Parts

Buttons: Call Factory

SK-004V

Directory Strips

 


Warning: filectime(): stat failed for VS-040ST-24-Buttons-VANGUARD-Apartment-Intercom-Lobby-Panel.php in /domains/leedan/VS-040ST-40-Buttons-VANGUARD-Apartment-Intercom-Lobby-Panel.php on line 256
Last modification time of the file: January 01 1970 00:00:00.