 LEE DAN®COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge, New York, 11788-3699 USA Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com Loading
|
|
|
 |
|
| SF-100C (SF100C) | UL SINGLE BED ROOM STATION |
 |
|
|
The SF-100C (SF100C) Room Station includes a jack allowing the attachment of a call cord (SF-301 or SF-301A). A call is registered at the nurse station, corridor light and corridor zone light (if installed) when the call cord button is used, or if the call cord is accidentally removed from the jack on the panel. The station includes a call-placed indicator which lights when a call is placed and a cancel button mounted on an attractive, flame retardant ABS plastic faceplate. |
|
| FEATURES |
|
UL®1069 Listed Simple, push button calling Call-placed indicator and cancel button Call automatically registers if call cord is accidentally removed Corridor zone light capability |
| SPECIFICATIONS |
|
Dimensions: Height 4.50” (114 mm) Width 2.75” (69 mm) Depth 1.75” (44 mm) Projects 0.4375” (11 mm) Construction: Attractive, flame retardant ABS plastic faceplate. Switches and electronic components are circuit board mounted. Connections: Plug-in connectors. Housing: Single gang ring with square box or exact equal. |
| REQUIRED COMPONENTS |
|
Tek-CARE® NC-110 Nurse Call System SF-301A (or SF-301) Call Cord |
Click
for Spec Sheet |
Architects' & Engineers' Specifications:
The room station shall be TekTone® SF-100C or approved equal as supplied by LEE DAN®, and shall include a call-placed indicator, a cancel button, and a jack for a TekTone® SF-301, SF-301A (or approved equal) call cord. A call will be registered at the nurse station, corridor light, and corridor zone light (if installed), and the station’s call-placed LED if the call switch is pushed or if the call cord is accidentally removed from its jack. All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on a rugged ABS plastic faceplate. The station shall be housed in a standard single gang ring with square box. A plug-in connector shall be provided for connections. The SF-100C shall be UL® 1069 Listed
|
| | Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring | |
This page was last updated
May 31. 2011
|