
Tek-CareTM
Emergency Call System
Innovations
in Communications™ Since 1955

APPLICATION
Tek-CareTM
is the ideal emergency call signalling system for multi-family
dwellings
housing the elderly or handicapped. Any occupant requiring emergency
assistance
can signal the building manager, attendant, and/or neighboring
occupants
by activating a conveniently located pullcord switch in the apartment,
or otherwise located throughout the facility. Depending upon the system
options selected, the activation of the pullcord switch instantly and
continuously
activates a lamp annunciator and audible signal at the managers office
or other location, activates a visual corridor dome lamp signal outside
the apartment door, sounds a horn or bell in the hallway. As an added
option,
activation of the pullcord switch can also operate an electric door
release
at the occupants door, enabling immediate access to the occupant’s
apartment.
ARCHITECTS' & ENGINEERS' SPECIFICATIONS: Contractor shall furnish and install a complete emergency call signalling system as described herein and as shown on the plans. It shall be a LEE DAN® Tek-CareTM system or approved equal.
Pull Stations: Emergency pull stations shall be LEE DAN® model SF-117/2B (SF117/2B) or approved equal. Station shall have nylon pullcord actuated switch mounted on durable ABS plastic panel marked ‘EMERGENCY’. Cord shall be nylon with molded pull tassel. Pullcord shall be a minimum of 6' long, so it can be reached from the floor if necessary. Cancellation of an emergency call shall be possible only at the pull station of origin.
Two (2) SF-117/2B (SF117/2B) emergency pull stations (or substitute SF-117/4C (SF117/4C) for systems including any optional bells, horns, door strikes or other signalling devices) shall be provided for each residence. One shall be placed for accessibility from the bed. The other shall be placed for accessibility from the bathroom.
System Controller: System controller shall be a LEE DAN® model PK-2019 or approved equal. Controller shall be powered by a LEE DAN® model PS-30A transformer (16VAC/30VA), or approved equal and shall be UL listed.
Annunciator Panel: Annunciator panel shall be a LEE DAN® Tek-Care series CM-800 or approved equal. Panel shall be constructed of anodized extruded aluminum with individually designated backlighted lens covers for each zone. Pigtail connections will not be acceptable.
Speaker shall be 3.5", 1 Watt, 45 Ohm. Speaker, bulbs and lens markings shall all be field replaceable. Glued-in-place components are not acceptable. Access screws shall be tamper resistant Scrulox type.
Dome Lamps: Dome lamps shall be LEE DAN® model LI-381 (LI381) or approved equal and shall be UL listed. Lamps shall include a translucent plastic cover which shall be removable for bulb maintenance without the use of hand tools. Base shall be made of high impact ABS plastic. One LI-381 dome light shall be mounted above each residence doorway.
Audible Signalling Devices: At each designated hallway, contractor shall furnish and install a model BE-005 (BE005) surface mount vibrating bell, or model VH-024/4F (with 870-B backbox) flush mount vibrating horn. Furnished bell or horn, shall operate on 24VAC and shall be compatible with LEE DAN® Tek-Care system or approved equal. Systems including optional bells or horns, shall include LEE DAN® model PS-050 (24VAC/50VA) or PS-100 (24VAC/100VA) transformer, or approved equal which must be UL listed.
Spare Parts: Contractor shall furnish a minium of 10% extra replacement bulbs (LI-014 for the annunciator, and LI-028 for the dome lights). A LEE DAN® model N-553A shall be provided with each annunciator for bulb maintenance. One spare SF-117/2B pull station, and one spare LI-381 dome light shall be provided for each 25 units placed in service.
CM-800
Annunciator Information
The CM-800
(CM800) series annunciator is a modular unit, constructed of extruded
aluminum.
CM-800 has easily removable lamp lens coverings for quick bulb
replacement,
and to protect lamp identifications. Up to four (4) digits are
available
per lamp. Positive screw terminals are provided for easy wiring
hook-up.
Available from 4 to 464 zones (or more) in multiples of four (4) lamp
indicators.
Each CM-800/XXX (XXX = no. of lamp indicators) annunciator consists of the following equipment: (all single quantities, unless indicated otherwise)
ANNUNCIATOR
CM-800
Annunciator/Speaker module with Tone-Off Button and Light. Holds up to
5 'PM' lamp modules.
PK-2019 Annunciator (AKA, PK2019) control unit (powered by PS-30A transformer, use PS-250 transformer for more than 4 simultaneous lamp indicators at one time).
OF-200 Series aluminum frame (see chart below). Order by size such as OF-201 = 1 gang, OF-202 = 2 gang.
OH-200 Series flush housing (see chart below). Order by size such as OH-201 = 1 gang, OH-202 = 2 gang.
PM-020/4 4-lamp indicator modules (used without ST-005D test buttons) - limited availability.
PM-110/4 4-lamp indicator modules (used with ST-005D test buttons) - Most Choose this type.
RP-021CM Custom lens markings. 1 required for each lamp indicator (4 for each 'PM' module).
AM-100 Blank aluminum modules. Used for mounting up to 9 PM-020/4 (or 9 PM-110/4N' and 1 ST-005D test button).
ACCESSORIES
SC-1
Scrulox screwdriver. Used to access special tamper-resistant screws
provided
with annunciator.
N-553A
Lamp extraction tool. Used to replace small (LI-014) annunciator bulbs.
LI-014 Replacement annunciator bulbs, 24 Volt, 40 MA. Fits PM-110/4n and PM-020/4 lamp modules.
LI-028
Replacement bulbs for LI-381 dome lamps, 24 Volt.
|
WITH ST-005D |
|
Model No. |
(in inches) All 17.75" High |
Mounting Box |
Width (All 4" Deep) All 16.25" High |
Mounting Box |
Modules |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Since 1955, LEE DAN® has manufactured standard, modified and custom intercom systems for hundreds of thousands of homes, condos, co-ops, apartments, and commercial users. We take great interest in the special security needs of our customers, and great pride in the quality of our products!
Call LEE DAN® customer service department toll-free for more information.
With continuous product improvement, sizes and other specifications are subject to change without notice.
NC-110A (NC110A) Annunciator Brochure
LEE
DAN®
COMMUNICATIONS, INC.
155 Adams
Avenue, Hauppauge, New York, 11788-3699 USA
Phone:
800-231-1414 or 631-231-1414, Fax:
631-231-1498,
E-Mail:
info@leedan.com
©1997-2010 Lee
Dan Communications,
Inc., All rights reserved. This page
updated January 18, 2010