Innovations in Communications™ Since 1955

155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail:
Remote Relay Module
Edwards is a registered trademark of UTC Fire & Security

The Edwards FSRRM Remote Relay Module is one component of the system that sets the FireShield ahead of its class. The module has five Form C relays rated at 12 amp each, 30VDC. It can be configured to function in either a zone relay mode or a common system mode.

When configured in the zone relay mode, relays energize when the associated IDC is in the alarm state. The module can be configured for activation by IDCs 1-5 or 6-10. One relay is automatically associated with each IDC.

When configured in the common system mode, relays energize or de-energize when the panel changes state. One relay is available for each of the following functions: Alarm, Supervisory, Trouble, Power and monitor.

The FSRRM mounts on a plastic snap track (included) or the FSRRM-S11 (optional) extended snap track. Each FSRRM-S11 holds up to 4 FSRRMs. Using either snap track the FSRRM can be installed in the MFC-A multifunction cabinet or another listed fire alarm enclosure. Panels will support two RRMs of each configuration for a total of six on the 10-zone panel.


Five Form C relays rated at 1 amp each, 30V DC
Functions in zone relay mode or common system mode
Compatible with 3, 5 and 10 zone panels
18-12 AWG terminals
18-27v dc
2 3/4" W x 3 3/8" H x 1 1/2" D
Operating environment:
temperature-32-120F (0-49C);
humidity- 93% RH, non-condensing
Click for Spec Sheet
FSRRM EDWARDS Remote Relay Module With 5 Form C Relays 
FSRRM-S11 EDWARDS 11" Snap Track 
MFC-A EDWARDS Multi Function Mounting Cabinet 
| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring |
This page was last updated June 10, 2010

 Phone: 800-231-1414 or 631-231-1414   Fax: 631-231-1498 E-Mail:

©2001-2011 Lee Dan Communications, Inc., All rights reserved. Best Viewed in Internet Explorer 8