in Communications™ Since 1955
LEE DAN®COMMUNICATIONS, INC.
155 Adams Avenue, Hauppauge, New York, 11788-3699 USA
Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: firstname.lastname@example.org
Explosionproof, Two Outputs
Edwards is a registered trademark of UTC Fire & Security
The Edwards 5533M Adaptatone Signal is an explosionproof, heavy-duty industrial, tone-selectable, signaling device capable of producing volume-controlled, high-decibel tones. The signal accepts up two contact closures and delivers two audible output signals selected from the 55 tones available. The two tones may be selected by setting miniature switches within the unit. One of the tones can be assigned a priority status to override the other tone.
The electrical inputs activating the Adaptatone Signal are received from field-wired, normally open contacts or from the Cat. No. 5538-4 Adaptatone Signal Actuator. (Not suitable for hazardous locations.)
The 5535M Adaptatone mounts on any surface using three bolts. See Adaptatone Signaling Installation.
For use where a high decibel sound is required for alert or evacuation in hazardous locations. Typical applications include signaling use in mining, granaries, flour mills, tankers, refineries, laboratories, spray booths, and other hazardous locations.
|55 tone capability- No additional tone modules needed|
|Internal volume control|
|Corrosion resistant heat flowed epoxy finish|
|Supplied with factory sealed 1/2" (13mm) threaded fitting for quick installation|
|UL 464 and 1203 Listed|
|UL Listed for Class I, Divisions 1 and 2, Groups B, C and D; hazardous locations|
|Speaker swivels 180 vertically or horizontally depending on orientation of mounting bracket|
|30 (762mm) numbered wire leads
Heavy duty zinc cast construction
|Click for Spec Sheet||
|| Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring ||
| This page was last updated
April 9, 2012