 LEE DAN®COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge, New York, 11788-3699 USA Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com Loading
|
|
|
 |
|
| PK-612A (PK612A) |
24VDC LAMP FLASHER |
 |
|
|
The PK612A (PK-612A) is a light-duty lamp flasher for DC use. It is designed for emergency call annunciators or similar use where continuous operation is not necessary. |
|
| FEATURES |
|
DC operation Easy installation Low power requirement |
| SPECIFICATIONS |
|
Dimensions: 5.0”H x 2.375”Wx2.25”D Construction: Rugged extruded aluminum case housing quality electronic components on a printed circuit board. Connections: Screw terminals Mounting: Surface Power Req’d: 24VDC Duty: Light Load Current: 1 amp |
| REQUIRED COMPONENTS |
|
CM-800 or CM-900 Series Annunciator PK-601A Power Supply PK-2019 Control Unit SF-117/2B or SF-117/2C Emergency Call Switch Or SF-117/4B or SF-117/4C Emergency Call Switch PS-30A Transformer |
Click
for Spec Sheet |
Architects' & Engineers' Specifications: The lamp flasher shall be LEE DAN®/TekTone® PK-612A, or approved equal, and shall provide 24VDC to flash the lamps on specified TekTone® annunciator control panels and dome lamps. The PK-612A circuitry shall be housed in a rugged extruded aluminum case. Screw terminals shall be provided for installation wiring.
|
| | Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring | |
This page was last updated
December 14, 2010
|