 LEE DAN®COMMUNICATIONS, INC. 155 Adams Avenue, Hauppauge, New York, 11788-3699 USA Phone: 800-231-1414 or 631-231-1414 Fax: 631-231-1498 E-Mail: info@leedan.com Loading
|
|
|
 |
|
| NC-399P(NC399P) |
Alphanumeric Pager |
 |
|
|
The NC399P (NC-399P) alphanumeric pager is a radio pager receiver with a large 2 line display, and is designed for use with TekTone®'s Tek-CARE®500 Wireless Emergency Call System, and TekTone®'s Tek-CARE®400, NC300II, NC200, NC150 and NC110 Nurse Call Systems. The pager stores up to 60 messages. Messages may be selectively deleted or locked into memory. Messages not locked into memory are automatically deleted as new messages arrive (beyond the 60 message), with the oldest message being deleted first. The NC399P may be configured for annunciation via vibration or audible tones, and has one alarm for daily annunciation. It can be programmed to turn on and off at preset times each day. The NC399P (NC-399P) has been pre-programmed to receive call information from TekTone® systems. Its CAP code may be reprogrammed in the field. |
|
| FEATURES |
|
Alphanumeric 2-line backlit display Easy to use large 4-button design Configurable for audible or vibration alerts Field programmable Includes holster belt clip and safety cord
|
| SPECIFICATIONS |
|
Dimensions: Height 1.9" (49mm) without holster belt clip Width 2.7" (70mm) Depth 0.7" (19mm) Construction: Electronic components surface mounted to PCB enclosed in ABS plastic housing Operating Freq: 457.550 Mhz Power supply: 1.5vDC (1 AA cell) |
|
REQUIRED COMPONENTS Tek-CARE®500 Wireless Emergency Call System Tek-CARE®400, NC300II, NC200, NC150, NC110 Nurse Call systems NC365/A/AT Transmitter/Control Unit NC3666/A/AT Transmitter Control Unit NC375 Transmitter Interface |
Click
for Spec Sheet |
Architects' & Engineers' Specifications: The alphanumeric pager shall be a TekTone®399P (NC-399P), or approved equal as supplied by LEE DAN®. It shall have a large two-line display and shall be capable of storing up to 60 messages. Pager shall have a four-button design for ease of operation and shall provide a choice of tone and vibrate modes for page annunciation. A holster belt clip shall be provided with each unit. The pager shall be pre-programmed to receive patient call information from TekTone®'s Tek-CARE®500 Wireless Emergency Call System or TekTone®'s Tek-CARE®400, NC300II, NC200, NC150 or NC110 Nurse Call System, via TekTone®'s NC365/A/AT or NC366A/AT Transmitter/Control Units. The pager's CAP code shall be reprogrammable in the field. Alphanumeric patient call information shall be displayed as generated by the emergency or nurse call system and the pager shall generate annunciation by sound or vibration.
|
| | Brochure | Doc | Spec Sheet | User Guide | Manual | Wiring | |
This page was last updated May 31, 2011
|